![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-158.png)
Push the “
䡩
” switch
䊊
C
to make the inside
rearview mirror operate normally. The indicator
light will turn off. Push the “I” switch
䊊
D
to turn
the system on.
Do not allow any object to cover the sensors
䊊
E
or apply glass cleaner on them. Doing so will
reduce the sensitivity of the sensor, resulting in
improper operation.
For the compass (if so equipped) operation, see
“COMPASS” in the “2. Instruments and con-
trols” section.
For the HomeLink
姞
Universal Transceiver opera-
tion,
see
“HomeLink
姞
UNIVERSAL
TRANS-
CEIVER” in the “2. Instruments and controls”
section.
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on the
passenger side are closer than they appear. Be
careful when moving to the right. Using only
this mirror could cause an accident. Use the
inside mirror or glance over your shoulder to
properly judge distances to other objects.
Adjusting outside mirrors
The outside mirror control switch is located on
the armrest.
The outside mirror will operate only when the
ignition switch is in the ACC or ON position.
Turn the switch right or left to select the right or
left side mirror
䊊
1
, then adjust using the con-
trol switch
䊊
2
.
Defrosting outside mirrors (if so
equipped)
The outside mirrors will be heated when the
rear window defroster switch is operated.
SPA2319
Pre-driving checks and adjustments
3-27
췽
—
—
07/26/08—pattie
墍