![background image](/i/infiniti/153279/infiniti-g37-coupe-2009/h/infiniti-g37-coupe-2009-406.png)
Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
Only use the recommended mounting position
or Intelligent Cruise Control (ICC) sensor ob-
struction (if so equipped) may result.
●
License plate bracket
●
J-nut × 2
●
Screw × 2
●
Screw grommet × 2
SEDAN
1. Park the vehicle on flat, level ground.
2. Locate the center position indicator
䊊
A
on
the lower part of the grille. Line up the
license plate bracket under the top of the
front bumper
䊊
B
with the tabs
䊊
C
. Hold
the license plate bracket in place.
3. Mark the center of the hole
䊊
D
with a
felt-tip pen.
4. Carefully drill two pilot holes using a 0.39
in (10 mm) drill bit at the marked loca-
tions.
(Be sure that the drill only goes
through the bumper fascia.)
Sedan
STI0496
INSTALLING FRONT LICENSE PLATE
Technical and consumer information
9-15
췽
—
—
07/26/08—pattie
墍