Инструкция для INFINITI G37 Coupe (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

●

ANTENNA ERROR (Antenna connection error)

●

LOADING (When the initial setting is per-
formed)

●

UPDATING (When the satellite radio sub-
scription is not active)

●

INVALID CH (Invalid channel/station is re-
ceived.)

SCAN tuning :

Push the SCAN tuning button to tune from low
to high frequencies and stop at each broadcast-
ing station for 5 seconds. Pushing the button
again during this 5-second period will stop
SCAN tuning and the radio will remain tuned to
that station.

If the SCAN tuning button is not pushed within
5 seconds, SCAN tuning moves to the next
station.

PRESET select :

Push the PRESET select button to go to the next
PRESET. After choosing from the PRESET A, B or
C, you can select the desired station using the
INFINITI controller or pushing the station preset
buttons

䊊

Station memory operations :

Six stations can be set for PRESET A, B and C.
The PRESET A, B and C function allows you to
store a combination of FM, AM and XM

姞

sta-

tions for easy access.

1. Choose preset station A, B or C using the

preset select button.

2. Tune to the desired station using the

SEEK, SCAN or TUNE button.

3. Select the desired station and push and

hold the desired station preset button

䊊

until a beep sound is heard. (The

radio mutes when the select button is
pushed.)

4. The station indicator will then come on

and the sound will resume. Memorizing is
now complete.

5. Other buttons can be set in the same

manner.

If the battery cable is disconnected, or if the
fuse opens, the radio memory will be erased. In
that case, reset the desired stations.

Text :

When the “Text” key is selected with the
INFINITI controller on the display and then the
ENTER button is pushed while the satellite radio

is being played, the text information will be
displayed on the screen.

●

CH Name

●

Category

●

Name

●

Title

●

Other

Compact Disc (CD) player/changer
operation

Push the ignition switch to the ACC or ON
position, push the LOAD button (if so equipped)
and insert the Compact Disc (CD) into the slot
with the label side facing up. The CD will be
guided automatically into the slot and start
playing.

After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.

If the radio is already operating, it will automati-
cally turn off and the CD will play.

If the system has been turned off while the CD
was playing, pushing the ON·OFF/VOL control
knob will start the CD.

Do not use 3.1 in (8 cm) discs.

Monitor, climate, audio, phone and voice recognition systems

4-43

췽

—

—
07/26/08—pattie

墍