Инструкция для INFINITI G37 Coupe (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Automatic transmission models:

Move the selector lever to the P (Park)
position.

Manual transmission models:

Apply the parking brake.

2. Raise the seatback (Coupe).

3. Push the ignition switch to the ON posi-

tion.

4. Adjust the driver’s seat, steering column

and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information, see
“SEATS” in the “1. Safety — Seats, seat
belts and supplemental restraint system”
section and “TILT/TELESCOPIC STEERING”
page 3-24 and “OUTSIDE MIRRORS” ear-
lier in this section.

5. Push the SET switch and, within 5 sec-

onds, push the memory switch (1 or 2)
fully for at least 1 second.

The indicator light for the pushed memory
switch will stay on for approximately 5 sec-
onds after pushing the switch.

If memory is stored in the same memory
switch, the previous memory will be deleted.

Linking Intelligent Key to a stored
memory position

The Intelligent Key can be linked to a stored
memory position with the following procedure.

1. Follow the steps for storing a memory

position.

2. While the indicator light for the memory

switch being set is illuminated for 5 sec-

onds, push the

button on the Intel-

ligent Key. If the indicator light blinks, the
Intelligent Key is linked to that memory
setting.

Push the ignition switch to the OFF position,

and then push the

button on the Intelli-

gent Key. The driver’s seat, steering wheel and
outside mirrors will move to the memorized
position.

Confirming memory storage

●

Push the ignition switch to the ON position
and push the SET switch. If the main memory
has not been stored, the indicator light will
come on for approximately 0.5 second.
When the memory has stored in position, the
indicator light will stay on for approximately
5 seconds.

●

If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.

●

If optional Intelligent Keys are added to your
vehicle, the memory storage procedure to
switch 1 or 2 and linking Intelligent Key
procedure to a stored memory position
should be performed again for each Intelli-
gent Key. For additional Intelligent Key infor-
mation, see “KEYS” earlier in this section.

Pre-driving checks and adjustments

3-31

췽

—

—
07/26/08—pattie

墍