Backing up near a projecting object
The predicted course lines
䊊
A
do not touch the
object in the display. However, the vehicle may
hit the object if it projects over the actual
backing up course.
Backing up behind a projecting
object
The position
䊊
C
is shown further than the
position
䊊
B
in the display. However, the posi-
tion
䊊
C
is actually at the same distance as the
position
䊊
A
. The vehicle may hit the object
when backing up to the position
䊊
A
if the object
projects over the actual backing up course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, push the
SETTING
button with the
RearView Monitor on, select the item key and
adjust the level using the INFINITI controller.
Do not adjust the Brightness, Tint, Color, Con-
trast and Black Level of the RearView Monitor
while the vehicle is moving. Make sure the
parking brake is firmly applied and the engine
is not running.
OPERATING TIPS
●
When the selector lever is shifted to the R
(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode. However, the radio can be heard.
●
It may take some time until the RearView
Monitor or the normal screen is displayed
after the selector lever has been shifted to R
from another position or to another position
from R. Objects may be distorted momen-
tarily until the RearView Monitor screen is
displayed completely.
SAA1923
SAA1924
4-24
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
07/26/08—pattie
墍