![background image](/i/d-link/151372/d-link-dws-3024/h/d-link-dws-3024-148.png)
148
© 2001- 2011 D-Link Corporation. All Rights Reserved.
Configuration Guide
The Unified Switch supports the
Traffic Conditioning Policy
type which is associated
with an inbound traffic class and specifies the actions to be performed on packets meeting
the class rules:
-
Marking the packet with a given DSCP, IP precedence, or CoS
-
Policing packets by dropping or re-marking those that exceed the class’s assigned data
rate
-
Counting the traffic within the class
•
Service –
Assigns a policy to an interface for inbound traffic.
CLI Example
This example shows how a network administrator can provide equal access to the Internet (or
other external network) to different departments within a company. Each of four departments
has its own Class B subnet that is allocated 25% of the available bandwidth on the port
accessing the Internet.
Figure 91.
DiffServ Internet Access Example Network Diagram
DiffServ Inbound Configuration
1. Ensure DiffServ operation is enabled for the switch.
config
diffserv
Internet
Port 1/0/5:
Outbound
Layer 3 Switch
Finance
Port 1/0/1
Marketing
Port 1/0/2
Test
Port 1/0/3
Development
Port 1/0/4
Source IP
172.16.10.0
255.255.255.0
Source IP
172.16.20.0
255.255.255.0
Source IP
172.16.30.0
255.255.255.0
Source IP
172.16.40.0
255.255.255.0