![background image](/i/d-link/151372/d-link-dws-3024/h/d-link-dws-3024-058.png)
58
© 2001- 2011 D-Link Corporation. All Rights Reserved.
Configuration Guide
Example #2: Show the Port Mirroring Session
(DWS-3024) #show monitor session 1
Session ID Admin Mode Probe Port Mirrored Port Type
---------- ---------- ---------- ------------- -----
1 Enable 0/8 0/7 Rx,Tx
(DWS-3024) #Monitor session ID “1” - “1” is a hardware limitation.
Example #3: Show the Status of All Ports
(DWS-3024) #show port all
Admin
Physical
Physical
Link
Link
LACP
Intf
Type
Mode
Mode
Status
Status
Trap
Mode
----
----
------
--------
--------
------
----
----
0/1
Enable
Auto
Up
Enable
Enable
0/2
Enable
Auto
Down
Enable
Enable
0/3
Enable
Auto
Down
Enable
Enable
0/4
Enable
Auto
Down
Enable
Enable
0/5
Enable
Auto
Down
Enable
Enable
0/6
Enable
Auto
Down
Enable
Enable
0/7
Mirror
Enable
Auto
Down
Enable
Enable
0/8
Probe
Enable
Auto
Down
Enable
Enable
0/9
Enable
Auto
Down
Enable
Enable
0/10
Enable
Auto
Down
Enable
Enable
Example #4: Show the Status of the Source and Destination Ports
Use this command for a specific port. The output shows whether the port is the mirror or the
probe port, what is enabled or disabled on the port, etc.
(DWS-3024) #show port 0/7
Admin
Physical
Physical
Link
Link
LACP
Intf
Type
Mode
Mode
Status
Status
Trap
Mode
----
----
------
--------
--------
------
----
----
0/7 Mirror
Enable
Auto
Down
Enable
Enable
(DWS-3024) #show port 0/8
Admin
Physical
Physical
Link
Link
LACP
Intf
Type
Mode
Mode
Status
Status
Trap
Mode
----
----
------
--------
--------
------
----
----
0/8
Probe
Enable
Auto
Down
Enable
Enable