![background image](/i/d-link/151372/d-link-dws-3024/h/d-link-dws-3024-050.png)
50
© 2001- 2011 D-Link Corporation. All Rights Reserved.
Configuration Guide
Example #2: show mac-address-table igmpsnooping
(DWS-3024) #show mac-address-table igmpsnooping ?
<cr> Press Enter to execute the command.
(DWS-3024) #show mac-address-table igmpsnooping
MAC Address
Type
Description
Interfaces
----------------------- -------
------------
-----------
00:01:01:00:5E:00:01:16
Dynamic
Network Assist
Fwd: 0/47
00:01:01:00:5E:00:01:18
Dynamic
Network Assist
Fwd: 0/47
00:01:01:00:5E:37:96:D0
Dynamic
Network Assist
Fwd: 0/47
00:01:01:00:5E:7F:FF:FA
Dynamic
Network Assist
Fwd: 0/47
00:01:01:00:5E:7F:FF:FE
Dynamic
Network Assist
Fwd: 0/47
Example #3: set igmp (Global Config Mode)
(DWS-3026) (Config)#set igmp ?
<cr> Press enter to execute the command.
groupmembership-interval
Configure IGMP Group Membership Interval
(secs).
interfacemode
Enable/Disable IGMP Snooping.
maxresponse
Configure IGMP Max Response time (secs).
mcrtrexpiretime
Sets the Multicast Router Present Expiration
time on the system.
(DWS-3026) (Config)#set igmp
Example #4: set igmp (Interface Config Mode)
(DWS-3026) (Config)#interface 0/2
(DWS-3026) (Interface 0/2)#set igmp ?
<cr> Press enter to execute the command.
fast-leave Enable/Disable Fast-Leave on a selected
interface
groupmembership-interval Configure IGMP Group Membership Interval
(secs).
maxresponse Configure IGMP Max Response time (secs).
mcrtrexpiretime Sets the Multicast Router Present Expiration
time on
the system.
mrouter Configure Multicast Router port.
(DWS-3026) (Interface 0/2)#set igmp