14
Connections
Connecting Power Source
Connect power, using one of the methods listed below:
To use the power adapter
Connect a DC 12 V / AC 24 V power source to the power input terminal as shown below.
1. Remove the insulation on the power cable as illustrated.
2. Attach the terminal tips.
3. Connect to the DC 12 V / AC 24 V UL Listed, Class 2 Power Supply only on the unit.
PoE Device
(IEEE802.3af)
PoE Device
(IEEE802.3af)
Router
Broadband
Service
Broadband
Service
To use the PoE (Power over Ethernet) device
Connect the PoE cable to the LAN port on the unit. You must use the “IEEE802.3af” standard PoE device.
PoE Device
(IEEE802.3af)
PoE Device
(IEEE802.3af)
Router
Broadband
Service
Broadband
Service
PoE Device
(IEEE802.3af)
Note:
If the video server doesn’t work properly after connect PoE device, please check if the PoE device is supplying enough power.
