15
To use the PoE (Power over Ethernet) device
Connect the PoE cable to the LAN port on the unit.
You must use the “IEEE802.3af” standard PoE device.
PoE Device
(IEEE802.3af)
Note:
If the camera doesn't work properly after connecting PoE
device, please check if the PoE device supplies enough
power.
Connecting Alarm Device
Alarm terminals are used to connect the alarm (relay)
devices such as sensors, door switches, etc.
A IN(R)/A IN (Sensor Input )
Connect the sensor device to the sensor input
terminal.
Sensor
Device
Connections
