![background image](/i/lg/154449/lg-lw342/h/lg-lw342-018.png)
18
Connections
lens iris output connector
Pin layout for the lens iris output connector.
No.
DC type lenses
VIDEO type lenses
1
Damping -
Vcc (+9 V)
2
Damping +
Not used
3
Drive +
Video
4
Drive -
Ground
Rewire the lens iris plug
1. Cut off the plug of the lens cable, cut off approxi-
mately 8 mm of the insulation, and then strip
approximately 2 mm of the ends of the cable
sheaths.
2. Solder the ends of the cable wires to the ends of
the pins, and then attach the cover of the lens iris
plug.