Paper recommendations > 10

M

ULTI

PURPOSE

TRAY

The multi purpose tray can handle the same sizes as the cassette trays but in weights up 

to 220

g/m²

. For very heavy paper stock use the face up (rear) paper stacker. This ensures 

that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths from 

127.0mm to 1220mm (banner printing).
The multi purpose tray can feed paper widths as small as 100mm and lengths up to 

1200mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and 

128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies. Up to 50 sheets 

of transparencies or 10 envelopes can be loaded at one time, subject to a maximum 

stacking depth of 10mm.
Paper or transparencies should be loaded print side up and top edge into the printer. Do 

not use the duplex (two-sided printing) function.

F

ACE

DOWN

STACKER

The face down stacker on the top of the printer can hold up to 350 sheets of 80g/m² 

standard paper, and can handle paper stocks up to 188g/m². Pages printed in reading order 

(page 1 first) will be sorted in reading order (last page on top, facing down).

F

ACE

UP

STACKER

The face up stacker at the rear of the printer should be opened and the tray extension 

pulled out when required for use. In this condition paper will exit via this path, regardless 

of driver settings.
The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle 

stocks up to 220g/m².
Always use this stacker and the multi purpose feeder for paper stocks heavier than 

188g/m².

D

UPLEX

UNIT

This option provides automatic two-sided printing on the same range of paper sizes as 

tray 2 (i.e. all cassette sizes except A6), using paper stocks from 64 - 120g/m². 

NOTE:
The duplex unit comes as standard with dn models.