Replacing consumable items > 45

I

MAGE

DRUM

REPLACEMENT

.

The printer contains four image drums: cyan, magenta, yellow and black.

1.

Press the cover release and open the printer’s top cover fully.

2.

Note the positions of the four 

toner 

cartridges 

(a) and image drums (b). It is essential 

that they go back in the same order.

3.

Holding it by its top centre, lift the image drum, complete with its toner cartridge, up 

and out of the printer.

4.

Put the assembly down gently onto a piece of paper to prevent toner from marking 

your furniture and to avoid damaging the green drum surface.

CAUTION!

Static sensitive devices, handle with care. 

WARNING!

If the printer has been powered on, the fuser will be hot. This area 

is clearly labelled. Do not touch.

CAUTION!

The green image drum surface at the base of the ID unit is very 

delicate and light sensitive. Do not touch it and do not expose it to 

normal room light for more than 5 minutes. If the drum unit needs 

to be out of the printer for longer than this, please wrap the 

cartridge inside a black plastic bag to keep it away from light. 

Never expose the drum to direct sunlight or very bright room 

lighting.

a

b