Replacing consumable items > 51
8.
Push the two retaining levers (a) towards the rear of the printer to lock the fuser in
place.
9.
Finally, close the top cover and press down firmly at both sides so that the cover
latches closed.
C
LEANING
THE
LED
HEAD
Clean the LED heads when printing does not come out clearly, has white lines or when text
is blurred.
1.
Switch off the printer and open the top cover.
2.
Gently wipe the LED head surface with a soft tissue
3.
Close the top cover.
CAUTION!
Do not use methyl alcohol or other solvents on the LED head as
damage to the lens surface will occur.
a
