Menu functions > 35

C

ALIBRATION

P

RINT

 S

TATISTICS

ITEM

SETTINGS

EXPLANATION

Auto Density

On/Off

Enables/disables automatic density adjustment.

Adjust Density

Execute

If Execute is selected, the printer will immediately 
adjust density and reflect it in TRC compensation.

This adjustment must be executed when the 
printer is idling. It can become invalid if executed 
in any other state.

Adjust 
Registration

Execute

When this menu is selected, the printer performs 
AutoAdjust Registration.

This adjustment must be executed when the 
printer is idling. 

Print Tuning 
Pattern

Execute

Prints the pattern for the user to adjust TRC. 
Ordinarily, this function is not needed because TRC is 
automatically adjusted to the recommended levels 
through density adjustment and TRC compensation.
Adjustment results will be reflected as offset values 
(addition) to the corrections through the Adjust 
Density/TRC Compensation function.

Cyan/Magenta/
Yellow/Black 
Tuning

Highlight

-3,-2,-1, 

0

,+1,+2,+3, 

Adjusts HIGHLIGHT (light area) of the TRC.
+ = Darker
- = Lighter

Mid-Tone

-3,-2,-1, 

0

,+1,+2,+3, 

Adjusts MID-TONE area of the TRC.
+ = Darker
- = Lighter

Dark

-3,-2,-1, 

0

,+1,+2,+3, 

Adjusts DARK area of the TRC.
+ = Darker
- = Lighter

Cyan/Magenta/
Yellow/Black 
Darkness

-3,-2,-1, 

0

,+1,+2,+3, 

Adjusts the engine density.
The Darkness settings for each of CMYK will be 
reflected as offset values (addition) to the corrections 
through the Adjust Density/TRC Compensation 
function.

ITEM

SETTINGS

EXPLANATION

Enter Password

XXXX

Enters a password to enter Print Statistics menu.
The default value is "0000".
The password for entry to Print Statistics is different 
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print 
Statistics function is not supported.

Section
Counter

Enable

/Disable

Specifies if the section counter is displayed in Usage 
Report Print or not.
Enable: Displayed, Disable: Not displayed.
Enable must be selected in Functions/Print Statistics/
Usage Report

Reset Group
Counter

Execute

Resets the main counter to zero.
When executing this menu, resets the main counter to 
zero and exits from the menu.
Enable must be selected in Functions/Print Statistics/
Usage Report.