Loading paper > 13

>

If you have two trays and you are printing from the 1st (upper) tray, you can pull 

out the 2nd (lower) tray during printing to reload it. However, if you are printing 

from the 2nd (lower) tray, do not pull out the 1st (upper) tray. This will cause a 

paper jam.

>

For face down printing, make sure the face up (rear) stacker (a) is closed (the 

paper exits from the top of the printer). Stacking capacity is approximately 

350 sheets, depending on paper weight.

>

For face up printing, make sure the face up (rear) stacker (a) is open and the 

paper support (b) is extended. Paper is stacked in reverse order and tray capacity 

is approximately 100 sheets, depending on paper weight.

>

Always use the face up (rear) stacker for heavy paper (card stock etc.).

CAUTION!

Do not open or close the rear paper exit while printing as it may 

result in a paper jam.

a

b