ML1120/ML1190 User’s Guide – Getting started > 14

1.

Turn the printer Power Switch to OFF.

2.

Set the Paper Type Lever to cut sheet. 

3.

Remove the Access Cover and set the Paper Thickness 
Lever to position 1.

4.

Press and hold the LF/FF and the LOAD/EJECT buttons and 
turn the Power Switch to ON. The ALARM indicator should 
be illuminated to indicate that there is no paper in the 
printer.

5.

With the long side of the paper against the paper guide, 
insert the paper carefully into the printer. The printer will 
automatically grip the paper and start the test print.

6.

When the test print has completed, the paper is 
automatically ejected.

NOTE
If required, you can pause the test print by pressing the SEL 
button and then resume the test print by again pressing the 
SEL button.

NOTE
If you want to stop the test print for any reason, press the SEL 
button followed by the LOAD/EJECT button to eject the paper. 
Turn the printer Power Switch to OFF.