ML1120/ML1190 User’s Guide – Paper handling > 18
P
APER
HANDLING
This section describes how to use cut sheet paper and continuous
forms in your printer.
L
OADING
CUT
SHEET
PAPER
1.
Ensure that the printer is switched ON.
2.
Ensure that the Pin Tractor covers are closed to avoid the
possibility of paper jams.
3.
Ensure the Paper Type Lever (1) is set to Cut Sheet.
NOTE
If there are any continuous forms in the printer, eject them
as described in
“Removing continuous forms” on page 36
.
1
