![background image](/i/oki/156677/oki-microline-1190/h/oki-microline-1190-045.png)
ML1120/ML1190 User’s Guide – Operating instructions > 45
S
ETTING
MENU
VALUES
The following information explains the printer settings and how
you can change them. Printer items and their values are printed
for reference.
C
ONFIRMING
CURRENT
SETTINGS
To print the current menu settings, use a cut sheet of A4 paper
or continuous forms of width at least 254 mm. In this example,
a sheet of A4 paper is used.
1.
Set the Paper Type lever to cut sheet mode.
2.
To activate menu mode:
(a)
Ensure that the printer is powered OFF.
(b)
While holding down the SEL button set the printer
Power Switch to ON.
3.
Place the cut sheet on the Paper Tray. The printer prints
the firmware details.
4.
Press the TEAR button to print out the current menu
settings.
TEAR+SEL
On-line and off-line
Microfeed down (0.366 mm
(1/144 in) step at tear-off
position only.
TEAR+LF/FF
On-line and off-line
Microfeed up 0.366 mm (1/
144 in) step at tear-off
position only.
SEL+TEAR
On-line
Quieter print mode
Each press of the button
pair progresses the printer
through Quieter print mode
> High multipart print mode
> Normal print mode
Off-line
Ineffective
BUTTON
STATUS
FUNCTION