![background image](/i/oki/156677/oki-microline-1190/h/oki-microline-1190-044.png)
ML1120/ML1190 User’s Guide – Operating instructions > 44
B
UTTONS
BUTTON
STATUS
FUNCTION
SEL
On-line
Sets the printer to off-line.
Off-line
Sets the printer to on-line
and disalarms the printer.
LF/FF
On-line
Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Off-line
Performs continuous line
feeding.
Ejects the cut sheet.
LOAD/EJECT
On-line and off-line
Continuous Forms mode
Continuous form fed until
first line of next page
If the continuous form is in
position, press to retract the
form to the Pin Tractors.
(If the sprocket holes of the
last page of the form
disengage from the sprocket
pins, do not attempt to eject
the paper as a paper jam
may result.)
On-line and off-line
Cut sheet manual mode
Ejects the cut sheet
TEAR
On-line
Continuous Forms mode
Delivers the continuous
form to the cut position. If
the button is pressed again
or data is received, the
original form position is
restored.
On-line
Cut sheet manual mode
Ineffective
Off-line
Ineffective
SEL+POWER ON
Switch
Enters menu mode.
LOAD/EJECT+SEL
On-line and off-line
Microfeed down 0.366 mm
(1/144 in) step.
LOAD/EJECT+LF/
FF
On-line and off-line
Microfeed up 0.366 mm (1/
144 in) step.