![background image](/i/oki/156677/oki-microline-1190/h/oki-microline-1190-062.png)
ML1120/ML1190 User’s Guide – Troubleshooting > 62
R
ESPONDING
TO
ALARM
CONDITIONS
Use the following table for guidance on how to respond to
indicated alarm conditions.
R
ESPONDING
TO
GENERAL
PROBLEMS
Use the following table to help you to identify symptoms with
possible causes and take suggested remedial actions.
INDICATOR
ALARM MEANINGS AND ACTIONS
SEL
ALARM
OFF
ON
Paper has run out. Add paper and press the SEL
button.
OFF
Flashing
The Paper Type lever is wrongly set for the type of
paper in use. Press the SEL button and set the
Paper Type lever to the correct position.
OFF
Flashing
Problem with cut sheet feeding. Remove the cut
sheet.
Flashing
ON
Print data is received but printing does not start
because no paper is being fed. Insert paper.
Flashing
OFF
Printing cannot be resumed at this stage. Turn the
power OFF, verify that the carriage moves properly,
then turn the power ON again.
If the problem is still there after you turn the
power ON again, contact your dealer.
PROBLEM
CAUSE
ACTION
No power
No power
The power cable is not
properly connected.
Check the power cable
is properly connected at
both power outlet and
printer.
Power outlet problem or
power outage.
Plug another appliance
into this outlet to check
if it works.