ML1120/ML1190 User’s Guide – Paper handling > 32
4.
Place the stack of continuous forms paper below the
printer. Bring the paper up through the slot in the base of
the printer.
5.
Lift the locking lever (1) of the left Pin Tractor and slide
the Pin Tractor as required (2) to adjust the paper position
then press the locking lever (3) back down to lock the Pin
Tractor in the desired position.
6.
Lift the locking lever (1) of the right Pin Tractor and slide
the Pin Tractor to the required position (2) to
accommodate the width of the continuous forms to be
3
2
1
