![background image](/i/oki/156677/oki-microline-1190/h/oki-microline-1190-061.png)
ML1120/ML1190 User’s Guide – Troubleshooting > 61
4.
Raise each Pin Tractor cover and remove the continuous
forms from the Pin Tractors.
5.
Rotate the Platen Knob and remove the forms from the
front of the printer.
6.
If a form fragment remains inside the printer, place two or
three forms in a stack on the Pin Tractors and turn the
Platen Knob to push the fragment out of the printer.
7.
When the paper jams are cleared, replace the Input Tray
and Rear Cover by fitting the Rear Cover into the grooves
at the back of the printer and pushing gently forward until
the Input Tray clips into place.
8.
Set the Power Switch to ON.