MediaSuite xxHFL5573D/10
Page 33
E
n
g
lis
h
[Mode]
[Stand alone]: The VSecure Unprotect
key is to be stored once via
USB and will remain available
until manual erasing it.
[Connected]: The VSecure Unprotect
key is to be send via
serialXpress RF and will
remain valid until power down
or receiving a successive
VSecure Unprotect key.
[RF Static]: The VSecure Unprotect key is
to be stored via RF and will
remain valid until manual
erasing it or receiving a
successive VSecure Unprotect
key.
[Load key to USB]
[Action]
Place a USB memory device
in the USB side I/O.
Press ‘
>
’ or ‘
OK
’ to copy the VSecure
Authorization key to the USB memory
device
[Load key to TV]
[Action]
Place a USB memory device
with a valid VSecure
Unprotect key in the USB side
I/O.
Press ‘
>
’ or ‘
OK
’ to copy the VSecure
Unprotect key to the USB memory device
[Vsecure self test]
[Action]
Internal self test to validate
VSecure. After this load
proper hotel specific keys.
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper VSecure RF
channel to load the VSecure RF Static or RF
Dynamic key(s):
[Frequency]
Frequency of MUX
(####)
[Medium]
Cable or Antenna (DVB
T)
[Service ID]
# # # # #
[ONID]
# # # # #
[NID]
# # # # #
[TSID]
# # # # #
[Symbol Rate]
# . # # #
[Modulation]
QAM16, QAM32,
QAM64, QAM128,
QAM256
Above parameters must match head-end
configuration
[Erase key option]
This function is to set the stored VSecure
Unprotect key(s) to erase:
[Shared key]
Erase the Shared key
[Odd key]
Erase the Odd key
[Even key]
Erase the Even key
[All keys]
Erase the Shared, Odd
and Even keys
[Erase key option]
This function is erase the key that were
selected by the Erase key option:
[Action]
Press ‘
>
’ or ‘
OK
’ to erase
the key(s).
