Chapter 9 VLAN
GS2210 Series User’s Guide
103
Figure 76
Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
The following table describes the fields in the above screen.
Table 37
Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
LABEL
DESCRIPTION
Voice VLAN Global Setup
Voice VLAN
Click the Voice VLAN radio button if you want to enable the Voice VLAN feature.
Type a VLAN ID number in the box next to the radio button that is associated
with the Voice VLAN. Click Disable radio button if you do not want to enable the
Voice VLAN feature.
Priority
Select the priority level of the Voice VLAN from 0 to 7. Default setting is 5.The
higher the numeric value you assign, the higher the priority for this Voice VLAN.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to default settings.
Voice VLAN OUI Setup
OUI address
Type the IP Phone manufacturer’s OUI MAC address. The first three byes is the
manufacturer identifier, the last three bytes is a unique station ID.
OUI mask
Type the IP Phone manufacturer's OUI mask address.
Description
Type an description up to 32 characters for the Voice VLAN device. For example:
Siemens.
Add
Click Add to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Index
This field displays the index number of the Voice VLAN.
OUI address
This field displays the OUI address of the Voice VLAN.