Chapter 6 Tutorials
GS2210 Series User’s Guide
49
2
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
settings to the run-time memory.
Figure 35
Tutorial: Set VLAN Type to 802.1Q
3
Click Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup.
4
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 102 for example) in
the Name field and enter 102 in the VLAN Group ID field.
5
Select Fixed to configure port 2 to be a permanent member of this VLAN.
6
Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.
7
Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.