Chapter 32 Link Layer Discovery Protocol (LLDP)
GS2210 Series User’s Guide
271
32.8 LLDP-MED Network Policy
Click Advanced Application > LLDP > LLDP-MED Network Policy (Click Here) to display the
screen as shown next.
Figure 194
Advanced Application > LLDP > LLDP-MED Network Policy
The following table describes the labels in this screen.
Table 128
Advanced Application > LLDP > LLDP-MED Network Policy
LABEL
DESCRIPTION
Port
Enter the port number to set up the LLDP-MED network policy.
Application Type
Select the type of application used in the network policy.
•
voice
•
voice-signaling
•
guest-voice
•
guest-voice-signaling
•
softphone-voice
•
video-conferencing
•
streaming-video
•
video-signaling
Tag
Select to tag or untag in the network policy.
•
tagged
•
untagged
VLAN
Enter the VLAN ID number. It should be from 1 to 4094. For priority tagged frames,
enter “0”.
DSCP
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with
the 0 representing use of the default DSCP value.
Priority
Enter the priority value for the network policy.
Add
Click Add after finish entering the network policy information. A summary table will list
all the Switch you’ve added.
Cancel
Click Cancel to begin entering the information afresh.
Index
This field displays the of index number of the network policy. Click an index number to
edit the rule.
Port
This field displays the port number of the network policy.