GS2210 Series User’s Guide
40
C
H A P T E R
5
Initial Setup Example
5.1 Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this
with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 24
Initial Setup Network Example: VLAN
1
Click Advanced Application > VLAN > VLAN Configuration in the navigation panel and click the
Static VLAN Setup link.