Chapter 4 The Web Configurator
GS2210 Series User’s Guide
36
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
PPPoE
This link takes you to a screen where you can configure intermediate agent settings in
port, VLAN, and PPPoE.
Errdisable
This link takes you to a screen where you can configure errdisable settings in CPU
protection, errdisable detect, and errdisable recovery.
Private VLAN
This link takes you to a screen where you can configure private VLANs.
Green Ethernet
This link takes you to a screen where you can configure green ethernet settings in EEE,
auto power down, abd short reach for each port.
LLDP
This link takes you to a screen where you can configure LLDP settings.
IP Application
Static Routing
This link takes you to a screen where you can configure static routes. A static route defines
how the Switch should forward traffic by configuring the TCP/IP parameters manually.
DiffServ
This link takes you to screens where you can enable DiffServ, configure marking rules and
set DSCP-to-IEEE802.1p mappings.
DHCP
This link takes you to screens where you can configure the DHCP settings.
ARP Setup
This link takes you to screens where you can configure the ARP learning settings for each
port.
Management
Maintenance
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
Access Control
This link takes you to screens where you can change the system login password and
configure SNMP and remote management.
Diagnostic
This link takes you to a screen where you can view system logs and test port(s).
Syslog
This link takes you to screens where you can setup system logs and a system log server.
Cluster
Management
This link takes you to screens where you can configure clustering management and view its
status.
MAC Table
This link takes you to a screen where you can view the MAC addresses (and types) of
devices attached to what ports and VLAN IDs.
ARP Table
This link takes you to a screen where you can view the MAC addresses – IP address
resolution table.
Path MTU Table
This link takes you to a screen where you can view the path MTU aging time, index,
destination address, MTU, and expire settings.
Configure Clone
This link takes you to a screen where you can copy attributes of one port to other ports.
Neighbor Table
This link takes you to a screen where you can view the IPv6 neighbor table which includes
index, interface, neighbor address, MAC address, status and type.
Table 5
Navigation Panel Links (continued)
LINK
DESCRIPTION