GS2210 Series User’s Guide
60
C
H A P T E R
8
Basic Setting
8.1 Overview
This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup, Port Setup, PoE, Interface Setup and IPv6 screens.
8.1.1 What You Can Do
• Use the System Info screen (
) to check the firmware version number.
• Use the General Setup screen (
) to configure general settings such as
the system name and time.
• Use the Switch Setup screen (
) to choose your VLAN type, set the GARP
timers and assign priorities to queues.
• Use the IP Setup screen (
) to configure the Switch IP address, default
gateway device, the default domain name server and the management VLAN ID.
• Use the Port Setup screen (
) to configure Switch port settings.
• Use the PoE Status screens (
) to view the current amount of power
that PDs are receiving from the Switch and set the priority levels for the Switch in distributing
power to PDs. This screen is available for PoE model(s) only.
• Use the Interface Setup screens (
) to configure Switch interface type
and interface ID settings.
• Use the IPv6 screens (
) to view IPv6 status and IPv6 configuration.
8.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen as shown. You
can check the firmware version number.