Chapter 8 Basic Setting
GS2210 Series User’s Guide
61
Figure 44
Basic Setting > System Info (for PoE model(s) only)
The following table describes the labels in this screen.
Table 10
Basic Setting > System Info
LABEL
DESCRIPTION
System Name
This field displays the descriptive name of the Switch for identification purposes.
Product Model
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware including the date
created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU Utilization
CPU utilization quantifies how busy the system is. Current (%) displays the current
percentage of CPU utilization.
Memory
Utilization
Memory Utilization shows how much DRAM memory is available and in use. It also displays
the current percentage of memory utilization.
Hardware Monitor
Temperature
Unit
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature
BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
Current
This shows the current temperature at this sensor.
MAX
This field displays the maximum temperature measured at this sensor.
MIN
This field displays the minimum temperature measured at this sensor.
Threshold
This field displays the upper temperature limit at this sensor.
Status
This field displays Normal for temperatures below the threshold and Error for those above.