Chapter 23 Multicast
GS2210 Series User’s Guide
177
23.4.1 IGMP Filtering Profile
An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch
are able to join. A profile contains a range of multicast IP addresses which you want clients to be
able to join. Profiles are assigned to ports (in the IGMP Snooping screen). Clients connected to
those ports are then able to join the multicast groups specified in the profile. Each port can be
assigned a single profile. A profile can be assigned to multiple ports.
Click Advanced Application > Multicast > IPv4 Multicast in the navigation panel. Click the
IGMP Snooping link and then the IGMP Filtering Profile link to display the screen as shown.
Figure 126
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering
Profile
The following table describes the labels in this screen.
Clear
Click Clear to reset the fields to the factory defaults.
Index
This is the index number of the IGMP snooping VLAN entry in the table. Click on an index
number to view more details or change the settings.
Name
This field displays the descriptive name for this VLAN group.
VID
This field displays the ID number of the VLAN group.
Delete
Check the entry(ies) that you want to remove in the Delete column, then click the
Delete button.
Cancel
Click Cancel to clear the Delete check boxes.
Table 73
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping
VLAN (continued)
LABEL
DESCRIPTION
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
LABEL
DESCRIPTION
Profile Name
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the profile
name and specify a different IP multicast address range.
Start Address
Type the starting multicast IP address for a range of multicast IP addresses that you want
to belong to the IGMP filter profile.