Preparations to print from Windows

- 16 -

1

2

3

4

5

6

(6)

Read "Environmental Advice for Users" 
and click "Next".

(7)

Select the driver you want to install and 
click the "Multi Installation" button to install 
them all at once.

(8)

Click Network to search the device.

(9)

When the target device is detected, select 
the device in the list, then click "Next". The 
installation begins.
If the device cannot be detected, specify 
the device's IP address and install it 
directly.

(10)

Click "Finish".

(11)

Click "Exit" button to finish.

4

Select [Start] - [Control Panel] - [Devices 
and Printers].

Setup is complete when an icon appears in the "Devices 
and Printers" folder.

Setup via USB (Windows)

Installing PCL printer drivers

Note

• Computer administrator rights are required.
• Unless otherwise noted, procedures required when using 

Windows 7 are listed. Screens and procedures may differ 
depending on the OS.

1

Turn the power to the computer ON and 
start Windows.

The "Add New Hardware Wizard" is displayed when the 
machine power is ON. If this happens, click [Cancel] and 
turn the power to the machine OFF before proceeding to 
the next step.