SENDING/RECEIVING A FAX
- 60 -
1
2
3
4
5
6
Note
• Do not place any heavy objects (8 Kg(18lb.) or over) on
the original glass and do not press on it with force.
Original scanning range
The following figures show the original scanning area. Any
information in the shaded area is not printed on the paper.
A4, A5, B5, Legal, Letter, ST, FOLIO
Placing the original(s) on the original
glass
This section describes how to set an original on the original
glass. Originals are sent in the order they are placed on the
original glass.
Do not place any heavy objects (8 kg/18 lb. or over) on the
original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the RADF (Reversing Automatic
Document Feeder), and place the original
with its face down on the glass.
Raise it 60 degrees or more for the detection of the
original.
2
Align the original against the left inner
corner of the glass.
• Different size originals can also be sent in one
transmission.
• When an original of any size other than A4/Letter is
placed in the direction shown in the upper figure,
transmission to a recipient is carried out so that the
pre-entered sender information is printed in position A
in the figure.
• When an original of A4/Letter size is placed in the
direction shown in the lower figure, transmission to a
recipient is carried out so that the pre-entered sender
information is printed in position B in the figure.
• The pre-entered sender information shows what is
registered in the Terminal ID.
Advanced Guide
3
Lower the RADF slowly.
Location
Maximum
size
Paper weight
Original size
Original glass Length:
216mm (8.5")
Width:
355.6mm
(14")
-
Other than
North
America: A4,
B5, A5,
FOLIO
North
America:
Letter, Legal,
ST
RADF
Legal 14
(8.5 x 14")
60 - 105 g/m
2
(16 - 28lb.)
Other than
North
America: A4,
B5, FOLIO
North
America:
Letter, Legal
(A5 and ST is
not
available.)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
A
B
