BASIC COPY MODES

- 48 -

1

2

3

4

5

6

Specifying both the original size and the 

copy paper size separately

1

Place paper in the tray(s).

2

Place the original(s).

3

Press [ZOOM] on the touch panel.

4

Select the desired sizes for the original and 
copy paper, and then press [OK].

Memo

• If you want to select a size other than the following for 

the original size and copy paper size, you need to 
register the size as “OTHER”. Once you register this 
size, it will be specified every time you press [OTHER] 
on the touch panel. 
Other than North America: A4, B5, A5
North America: Letter, Legal
For how to register, see the following page:



P.48 "Registering paper sizes to “OTHER” size"

• Paper sizes can also be registered by pressing the 

desired tray button of the equipment status indication 
area on the BASIC menu.

5

Select other copy modes as required, and 
then press the [START] button on the 
control panel.



Registering paper sizes to “OTHER” 
size

If you want to select a size other than the following for the 
original size and copy paper size, you need to register the size 
as “OTHER” following the procedures below. Once you register 
this size, it will be specified every time you press [OTHER] on 
the touch panel.
Other than North America: A4, B5, A5
North America: Letter, Legal

Note

• You can register only standard sizes as [OTHER] and 

cannot register any non-standard sizes.

1

Press [SIZE SETTING] on the touch panel.

2

Select the desired size.

The selected size will be registered as an “OTHER” size.