CHECKING AND CANCELING THE COMMUNICATIONS

- 73 -

1

2

3

4

5

6

2

The confirmation screen for the next 
original is displayed. Press [JOB CANCEL].

• If you press [JOB FINISH], the scanned originals are 

sent.

• If you leave the screen for the next original unattended 

for the period of the auto clear setting time (45 sec. by 
manufacturer default) after it appears, the memory 
transmission is canceled.

3

The confirmation screen for the deletion is 
displayed. Press [YES].

Canceling direct transmissions

You can cancel the direct transmission during scanning.

Note

• Even if you cancel transmission in the direct TX mode, the 

part of the original that was scanned before transmission is 
canceled has been sent.

1

Press the [STOP] button on the control 
panel while the original is being scanned.

The scanning and transmission are stopped.

Canceling reserved transmissions

You can display the list of the reserved transmissions, and 
cancel the reserved transmissions that are in the queue or in 
progress.

1

Press [JOB STATUS], and then select the 
[FAX] tab.

The list of the reserved transmissions is displayed. This 
step is the same as that for checking the reserved 
transmission.



P.71 "Checking reserved transmissions"

2

Select the reserved transmission you want 
to delete, and then press [DELETE].

More than one job can be selected.

In the “Status” column, you can check the status of the 
reservation. “Wait” indicates that the data are waiting to 
be sent. “Line1” indicates that the data are being sent. 
Delayed transmission reservation and polling 
transmission/reception can be canceled.