![background image](/i/oki/156677/oki-microline-1190/h/oki-microline-1190-046.png)
ML1120/ML1190 User’s Guide – Operating instructions > 46
5.
Exit or proceed to change menu settings:
(a)
To exit menu settings confirmation, save the current
settings and eject the paper, press and hold TEAR,
then press LOAD/EJECT and then LF/FF.
(b)
M
ENU
SETTING
Set menu item values (printed out for reference as you proceed)
as follows:
1.
While holding down the SEL button set the printer Power
Switch to ON.
2.
Place the cut sheet on the Paper Tray.
3.
Press SEL (or TEAR and SEL together) to step forward
(backward) through the main menu.
4.
Press LF/FF (or TEAR and LF/FF together) to step forward
(backward) through the sub-menus.
5.
Press LOAD/EJECT (or TEAR and LOAD/EJECT together) to
step forward (backward) through the settings for each
menu item.
6.
Repeat steps 3 to 5 as required to change settings for
other menu items.
7.
To exit menu settings confirmation, save the current
settings and eject the paper, press and hold TEAR, then
press LOAD/EJECT and then LF/FF.
NOTE
Before changing menu settings, you may wish to print the
current menu settings as in
“Confirming current settings” on
NOTE
Switching the printer OFF does not save the new settings.