![background image](/i/pentax/151770/pentax-gr/h/pentax-gr-112.png)
3
Chang
ing C
amer
a S
ettings
110
Setting the Information Displayed in Shooting Mode
You can set the information displayed for each number of presses of the
DISP. button in shooting mode.
1
Select [DISP. Button Display Setting] in the [Setup] menu and
then press the
$
button.
The [DISP. Button Display Setting] screen appears.
2
Use the
#$
buttons to set [Use DISP.
Screen].
O
1 to
O
3 to indicate the number of but-
ton presses, and
O
Off indicates the picture
display is off.
3
Use the ADJ. lever to enable or disable
a setting.
A setting without a check mark is disabled (the information is not displayed).
For the setting in the diagram, there are three display patterns for when the
DISP. button is pressed.
O
1 cannot be disabled.
4
Use the
!"#$
buttons to select a display item and then use
the ADJ. lever to turn it ON/OFF.
Graphic Display
Displays the values that can be set at the bottom of the screen while the aper-
ture and shutter speed are being changed.
Information Display
Displays symbols for the shooting mode, settings, etc.
Grid Guide
Displays guidelines for shooting.
Select the type of grid in [Grid Guide Display Options] of the [Setup] menu.
Level Indicator
Displays an indicator for confirming camera tilt.
Histogram
Displays a histogram.
5
Press the MENU/OK button.
The [Setup] menu reappears.