MediaSuite xxHFL5573D/10
Page 24
Hear another device at standby
You can hear a connected HDMI-CEC
compliant device through the TV
speakers, even when the TV is in standby.
To switch on, see
Use more of your TV >
Use EasyLink > Hear another device at
TV standby
What you need
To benefit from Philips EasyLink advanced
control features, make sure that you do
the following:
Connect at least two HDMI-CEC
compliant devices through HDMI
Configure each HDMI-CEC
compliant device properly
Switch on EasyLink
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to the TV remote control.
Caution:
This is an advanced setting. Devices that
do not support this setting will not respond
to the TV remote control.
Select speaker output
If the connected device is HDMI Audio
Return Channel (HDMI ARC) compliant,
you can output TV audio through HDMI
cable. Additional audio cable is not
required. See
Connect your TV > About
cables > HDMI
Following options can be selected:
[Off]
: Switch off TV speakers.
[On]
: Switch on TV speakers.
[EasyLink]
: Stream TV audio
through the connected HDMI-
CEC device.
Switch the TV audio to the
connected HDMI-CEC audio
device through the adjust menu.
[EasyLink autostart]
: Turn off
TV speakers automatically and
stream TV audio to the
connected HDMI-CEC audio
device.
Select speaker output with Adjust
menu
If
[EasyLink]
or
[EasyLink autostart]
are
selected, access the adjust menu to
switch the TV audio:
[TV]
: On by default.
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches
to system audio control. TV audio is
then streamed through the
connected device.
[Amplifier]
: Stream audio through
the connected HDMI-CEC device. If
system audio mode is not enabled
on the device, audio continues to
stream from the TV speakers.
If
[EasyLink autostart]
was
enabled, the TV prompts the
connected device to switch to system
audio mode.
