3
.40
Stand-alone Fax
Group Dialling
(for Multi-Address Transmission)
Multiple one-touch and speed dial numbers can be registered as a group.
By using the group number, you can send a document to multiple parties
in a single operation. The machine will dial the remote numbers in stored
sequence. If the number is busy, the machine will dial the next stored
number. After dialing all of the stored numbers, the unit will
automatically redial any number that was busy. Before you can use this
feature, you must program the group numbers desired.
Storing One-Touch or Speed Dial Numbers for Group
Dialing
1. Press
Setup
on the front panel.
The display shows the first menu; FAX NUMBER/NAME.
2. Press
➛
or
❿
until ‘GROUP DIAL SETUP’ appears, and press
Start/Enter
.
3. Press one of the 20 one-touch buttons that you want to use for group
dial.
4. The display asks you to confirm that you use this button for group
dialing.
Press
Start/Enter
to confirm.
If you do not want to use the one-touch number, press
Stop
.
Then,press another one-touch button.
Note:
If the button you chose has already been used for one-touch
dialing , the display warns the one-touch number is used.
Then you are allowed to select ‘OTHER’ or ‘RENEW’ by pressing
➛
or
❿
. To replace that number and continue, select
RENEW
and to start over with a different location, select
OTHER
. When the
desired option is displayed, press
Start/Enter
.
GROUP NO.: T15
T15 USED !
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
