31
Messages
to enable/disable the features.
3. When finished, select
Save > Yes
.
To check the memory status:
1. From the main menu, select
Messages >
SMS > Settings > Memory Status
.
2. Press
OK
to display the
Memory Status
.
The
Messages > SMS > Settings > Sending
option allows you to select between
Send Only
and
Send and save
. When set to Send and
save, the messages you send are automatically
saved to Outbox.
The preferred bearer option sets the type of
network you prefer. When there is a choice of
a GSM or GPRS network, the phone then uses
the network of your preference.
To set the preferred bearer option:
1. From the main menu, select
Messages >
SMS > Set > Pref Bearer
.
2. Select the network option you prefer.
Select
Pref GMS
or
Pref GPRS
to set a
preference.
Press
OK
to confirm your selection.
MMS
MMS messages are like SMS messages but
they can also contain sounds and pictures.
Writing an MMS message
Writing an MMS message is not very different
from creating an SMS message. MMS
messages are made up of slides. Each slide
contains a combination of text, image, or audio.
To create an MMS message:
1. From the main menu, select
Messages >
MMS > edit MMS
.
2. Select the
to
field then select
edit.
3. Use the navigation keys to highlight the
Add Number
or
Add e-mail
option then
press the enter
key to confirm.
You can either add an e-mail address or
number manually, or press the left soft
key
to search from the phonebook.
4. After you have entered the recipient(s),
press
OK > Options > Done
.
5. Use the navigation keys to highlight and
select
Cc
, and
Bcc
recipients. Enter
recipients in these fields in the same way
as the
to
field.
6. Use the navigation keys to highlight the
Subject
field then select
edit
.
7. Use the keypad to enter a subject.
To create a slide:
1. To create a slide, use the navigation keys
to highlight the
edit Content
field then
select
edit
.
You can enter text in the same way as
you would for an SMS message.
2. Press the left soft key to display the
Options
menu.
3. Use the navigation keys to highlight an
option and press
OK
to confirm.
You can add an image, add audio, attach
a file, or change the input method.
