52
Record Audio
While in video recorder capture mode, select
Options > Record Audio
. Use the navigation
keys to select between On and Off to determine
whether to record sounds and images
simultaneously or not.
LeD Highlight
Use the LED highlight option to turn on/off the
flash as you record videos.
To apply the LED highlight:
1. While in video recorder capture mode,
select
Options > LeD Highlight
.
2. Use the left/right navigation key to select
betwen On and Off, then press
OK
to
apply the setting.
Storage
Use the default storage option to set where
captured videos are stored. You can store
captured videos either in the phone (internal)
memory, or on a microSD
™
card if installed.
To set the storage option:
1. While in video recorder capture mode,
select
Options > Storage
.
2. Highlight
Phone
or
Memory Card
, then
press
OK
to confirm.
Advance
Use the Advance options to configure video
quality and size, encode format, white balance,
EV, night mode, and AC frequency. You may
also restore all factory default video setings.
NOte:
EV stands for exposure value. The EV option enables
you to manually raise or lower the exposure value.
The AC Frequency option adjusts for lighting flicker. Select the
frequency of electrical current in your area.
Restore Default
Use the Restore Default option to restore all
factory default video settings.
To restore default settings:
1. While in video recorder capture mode,
select
Options > Restore Default
.
2. A message asking you to confirm the
action is displayed.
3. Select
Yes
to restore defaults, or select
No
to abort.
Video setting shortcuts
While on video recorder capture mode, the
number keys also act as shortcut keys for
the video settings. The keys are assigned as
follows:
1
Effect
2
White Balance
3
LED Highlight
4
Night Mode
Press the key repeatedly to change a given
setting. For example, if you press
4
for Night
Mode, pressing again enables you to apply Off
or On to the setting.
