![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-125.png)
For the welcome light function, the courtesy
light
䊊
A
and the passenger cabin illumination
will illuminate when you approach the vehicle
with the Intelligent Key (within approximately
1 m (3.3 ft) of the antenna built inside the door
handles) and the following conditions are met.
●
All doors are closed and locked.
●
The ignition switch is in the LOCK or OFF
position.
●
The selector lever is in the P (Park) position.
●
The Intelligent Key is outside the vehicle.
●
The courtesy light operates within a set
duration.
The welcome light function will be deactivated
automatically if it does not operate within a set
duration to prevent battery discharge. (After
starting the engine, the welcome light function
will be activated again.) Note that the duration
is set to 9 days. The function is set to enabled
as the factory default setting.
The welcome light function can be disabled in
the following procedure.
1. Push the ignition switch to the ON posi-
tion.
2. Push the door handle request switch on
the driver’s side door handle for more
than 5 seconds within 20 seconds after
the ignition switch is pushed to the “ON”
position.
3. A chime sounds when the setting is com-
pleted.
Perform the same procedure to activate the
welcome light function again.
MAP LIGHTS
Push the button as illustrated to turn the light
on or off.
SIC4328
SIC4356
WELCOME LIGHT
INTERIOR LIGHTS
2-54
Instruments and controls
췽
—
—
07/15/10—tbrooks
墍