Инструкция для INFINITI M56 (2011)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

●

The Dual control mode cannot be activated
when the air conditioner is in the front

defrosting mode “

”.

Automatic upper ventilator system:

1. Push the “CLIMATE” button to on.

2. Select the “Upper Vent” key and the

indicator on the screen will illuminate.
The air flow against the driver’s or pas-
senger’s upper body becomes gentle.

In this mode, air from the center ventilators
flows both straight and upward in order to
control the cabin temperature without blow-
ing air directly on the occupants.

Distribution between straight and upward flows
is determined automatically by the climate con-
trol system. If you prefer strong air flow against
your upper body, select “Upper Vent” key to
turn the indicator off.

When the outside temperature decreases to
approximately

⫺

14°F (

⫺

10°C), the

⬙

Upper Vent

⬙

function will not activate. The

⬙

Upper Vent

⬙

function will reactivate automatically when am-
bient temperature is approximately

⫺

14°F

(

⫺

10°C) or above.

Display Forest Air™ system setting screen :

The “Forest Air setting” screen will appear when
selecting the “Forest Air Setting” key.

For the details about the Forest Air™ system
setting operation, see “Setting Forest Air™”
later in this section.

Display Forest Air™ Information screen :

The Forest Air™ system information screen will
appear when selecting the “Forest Air Info” key.

For details about the Forest Air™ system infor-
mation screen, see “Forest Air™ system Infor-
mation” later in this section.

FOREST AIR™

The Forest Air™ system keeps the air inside the
vehicle clean using the automatic air intake
system and automatic ventilation. The Forest
Air™ system also makes the inside of the
vehicle more comfortable, using a combination
of the upper ventilator and center ventilators at
random.

*Forest Air™ is a trademark of Nissan Motor
Co., Ltd.

Main operation

Push the “

” button.

(The “

” and “AUTO” indicator light on the

button will illuminate.)

When the following functions and sensors are
turned on, the Forest Air™ system settings will
activate.

– Breeze Mode

– Outside odor and exhaust gas detection sensor

– Inside Air Quality sensor

– Auto humidity control

The fan speed and air flow is automatically set
to the AUTO position.

●

The Forest Air™ system can be adjusted
and/or activated/deactivated for each func-
tion. For details of the Forest Air™ system
settings, see later in this section.

●

When the “

” button is pushed while

the air conditioner is off, the air conditioner
will automatically activate.

●

The Forest Air™ system automatically turns
off when the outside temperature is below
approximately 32°F (0°C). When the tem-
perature is below approximately 32°F (0°C),
the Forest Air system can not be turned on

when the

button is pressed. This is

not a malfunction. Push the

to reac-

tivate the system when the outside tempera-
ture is above approximately 32°F (0°C). The

Monitor, climate, audio, phone and voice recognition systems

4-39

췽

—

—
03/02/10—pattie

墍