![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-345.png)
To set cruising speed,
accelerate your vehicle to
the desired speed, push the SET/COAST switch
and release it. (Vehicle ahead detection indica-
tor, set distance indicator and set vehicle speed
indicator come on.) Take your foot off the
accelerator pedal. Your vehicle will maintain the
set speed.
When the SET/COAST switch is pushed under
the following conditions, the system cannot be
set and the ICC indicators will blink for approxi-
mately 2 seconds:
●
When traveling below 20 MPH (32 km/h) and
the vehicle ahead is not detected
●
When the selector lever is not in the D or
Manual mode
●
When the windshield wipers are operating at
high speed (HI). If the vehicle is equipped
with a rain sensing auto wiper, the system
may cancel when the wipers are set to the
AUTO position.
●
When the parking brake is applied
●
When the brakes are operated by the driver
SSD0981
SSD0982
5-50
Starting and driving
췽
—
—
01/12/10—pattie
墍