![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-351.png)
NOTE:
The approach warning chime may sound and the
system display may blink when the ICC sensor
detects some reflectors
䊊
A
which are fitted on
vehicles in other lanes or on the side of the road.
This may cause the ICC system to decelerate or
accelerate the vehicle. The ICC sensor may de-
tect these reflectors when the vehicle is driven
on winding roads, hilly roads or when entering
or exiting a curve. The ICC sensor may also de-
tect reflectors on narrow roads or in road con-
struction zones. In these cases you will have to
manually control the proper distance ahead of
your vehicle.
Also, the sensor sensitivity can be affected by
vehicle operation (steering maneuver or driving
position in the lane) or traffic or vehicle condi-
tion (for example, if a vehicle is being driven
with some damage).
Automatic cancellation
A chime sounds under the following conditions
and the control is automatically canceled.
●
When the vehicle ahead is not detected and
your vehicle is traveling below the speed of
15 MPH (24 km/h)
●
When the system judges the vehicle is at
standstill
●
When the selector lever is not in the D or
Manual mode
●
When the windshield wipers are operating at
high speed (HI). If the vehicle is equipped
with a rain sensing auto-wiper, the system
may cancel when the wipers are set to the
AUTO position.
●
When the parking brake is applied
●
When the drive mode select switch is turned
to the SNOW mode
●
When the VDC system is turned off
●
When ABS or VDC (including the traction
control system) operates
●
When driving into a strong light (i.e., sun-
light)
●
When distance measurement becomes im-
paired due to adhesion of dirt or obstruction
to the sensor
●
When a wheel slips
SSD0284A
5-56
Starting and driving
췽
—
—
01/12/10—pattie
墍