![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-326.png)
tance switch again to turn off the BSI system.
The BSI ON indicator light will turn off.
NOTE:
Whenever the BSI system is turned on, the BSW
system will also be on. If the BSW system has
previously been turned off using the warning
systems switch, it will be turned on and off to-
gether with the BSI system when pushing the
dynamic driver assistance switch. However, the
warning systems ON indicator on the warning
systems switch does not change.
Changing the dynamic driver
assistance switch settings
The dynamic driver assistance switch will turn
on and off the LDP, BSI and DCA systems at the
same time when each system is enabled using
the settings menu on the center display.
1. Push the SETTING
䊊
1
button and highlight
the “Driver Assistance” key on the display
using the INFINITI controller. Then push
the ENTER
䊊
2
button.
2. Highlight the “Dynamic Assistance set-
tings” key, and push the ENTER
䊊
2
but-
ton.
SSD0939
SSD1001
Starting and driving
5-31
췽
—
—
01/12/10—pattie
墍