![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-441.png)
2. Insert
a
flat-blade
screwdriver
䊊
A
wrapped with a cloth into the slit
䊊
B
of
the corner and twist it to separate the
upper part from the lower part.
3. Replace the battery with a new one.
Recommended battery:
CR2025 or equivalent
●
Do not touch the internal circuit and
electric terminals as it could cause a
malfunction.
●
Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
●
Make sure that the + side faces the
bottom of the case.
4. Align the tips of the upper and lower
parts, and then push them together until
it is securely closed.
5. Operate the buttons to check its opera-
tion.
See an INFINITI retailer if you need any assis-
tance for replacement.
FCC Notice:
This device complies with Part 15 of FCC Rules
and RSS-Gen of IC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, in-
cluding interference that may cause undesired
operation of this device.
SDI1889
8-26
Maintenance and do-it-yourself
췽
—
—
07/26/10—dmoore
墍