![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-097.png)
The outside air temperature mode includes a
low temperature warning feature. If the outside
air temperature is below 37°F (3°C), the warning
is displayed on the screen.
The outside temperature sensor is located in
front of the radiator. The sensor may be affected
by road or engine heat, wind directions and
other driving conditions. The display may differ
from the actual outside temperature or the
temperature displayed on various signs or bill-
boards.
6. Setting
Setting cannot be made while driving. A mes-
sage “Setting can only be operated when
stopped” is also displayed on the dot matrix
crystal display.
The
switch
䊊
A
and
switch
䊊
B
are
used in the setting mode to select and decide a
menu.
SKIP :
Push the
switch
䊊
A
to move to the
warning check mode.
Push the
switch
䊊
B
to select other
menus.
ALERT :
There are 3 submenus under the alert menu.
●
BACK
Select this submenu to return to the top
page of the setting mode.
●
TIMER
Select this submenu to specify when the
“TIMER” indicator activates.
●
ICY
Select this submenu to display the low out-
side temperature warning.
MAINTENANCE :
There are 5 submenus under the maintenance
menu.
●
BACK
Select this submenu to return to the top
page of the setting mode.
●
OIL
Select this submenu to set or reset the
distance for changing the engine oil.
●
FILTER
Select this submenu to set or reset the
distance for replacing the oil filter.
●
TIRE
Select this submenu to set or reset the
distance for replacing tires.
●
OTHER
Select this submenu and set or reset the
distance for replacing items other than the
engine oil, oil filter and tires.
OPTIONS :
There are 4 submenus under the display menu.
●
BACK
Select this submenu to return to the top
page of the setting mode.
●
LANGUAGE
Select this submenu to choose English or
French for display.
●
UNIT
Select this submenu to choose the unit from
miles, MPG, °F or km, l/100km, °C.
●
EFFECTS
Select this menu to set the dial effects
described below to on or off.
– The indicator needles sweep in the me-
ters when the engine is started.
2-26
Instruments and controls
췽
—
—
07/15/10—tbrooks
墍