![background image](/i/infiniti/153108/infiniti-m56-2011/h/infiniti-m56-2011-332.png)
If the driver activates the turn signal, then the
BSW/BSI indicator light flashes and a chime
will sound twice.
NOTE:
If the driver activates the turn signal before a
vehicle enters the detection zone, the BSW/BSI
indicator light will flash but no chime will sound
when another vehicle is detected.
If the BSI system is on and your vehicle ap-
proaches the lane marker while another vehicle
is in the detection zone, the BSW/BSI indicator
light flashes and a chime will sound three
times. Then, the BSI system slightly applies the
brakes on one side to help return the vehicle
back to the center of the driving lane.
NOTE:
●
The BSI system will not operate if your ve-
hicle is on a lane marker when another ve-
hicle enters the detection zone. In this case
only the BSW system operates.
●
BSI braking will not operate or will stop oper-
ating and only a warning chime will sound
under the following conditions.
–
When the brake pedal is depressed.
–
When the accelerator pedal is depressed
while brake control assist is provided.
–
When steering quickly
–
When the ICC, DCA, FCW or IBA warnings
sound.
SSD1038
SSD1094
SSD1040
Starting and driving
5-37
췽
—
—
03/02/10—pattie
墍